Analogous Electronics Components
Independent modules for use in your own projects.
The PA-V series are ultralow noise and distortion, broadband and low impedance amplifiers. The frequency range can be adjusted according to customer requirements.
The gain is switchable by a 3-position switch (20/40/60 dB), which can be adjusted according to customer requirements.
The PA-V series features a highly linear, low noise input stage that increases the full power bandwidth at accuracy gains with high slew rates and with relatively low power.
The PA-V series also features an extremely high slew rate of 1350 V/µs, using the entire dynamic range without trading off bandwidth or distortion.
The PA-V series settles to 0.1% in 18 ns and recovers from overdrive in 50 ns.
The PA-V drives 100 O loads at breakthrough performance levels with only 60 mA of supply current.
The PA-V is designed to work in a wide variety of applications like Pre-amplifiers, Receivers, Instrumentations, Filters, IF and baseband amplifiers, A-to-D drivers, DAC buffers, Optical electronics.
| Switchable gain: | 20 / 40 / 60 dB (can be adjusted on customer request) |
| Frequency range (-3dB BW): | 310 Hz to 185 MHz (can be adjusted on customer request) |
| ± 1.0 dB Gain flatness: | 600 Hz to 110 MHz |
| ± 0.5 dB Gain flatness: | 825 Hz to 87 MHz |
| ± 0.2 dB Gain flatness: | 1.2 KHz to 68 MHz |
| Input impedance: | 50 Ω |
| Integrated input noise: | 15 µV RMS |
| Harmonic distortion: | 2 nd harmonic -92 dB @ 10 MHz / -98 dB @ 100 MHz 3 rd harmonic -102 dB @ 10 MHz / -82 dB @ 100 MHz |
| Input voltage range: | 35 µV RMS 1 mV RMS @ 50 Ω impedance |
| Output impedance: | 50 Ω |
| Output noise: | 0.15 mV RMS @ 20 dB 1.53 mV RMS @ 40 dB 15.4 mV RMS @ 60 dB |
| Output voltage: | 2 Vpp @ 50 Ω load (for linear amplification) |
| Output current: | 60 mA @ 50 Ω load 130 mA max. (Short-circuit current) |
| Slew rate: | 1350 V/µs |
| Settling time to 0.1%: | 18 ns |
| Power Supply: | ± 5 V / ± 100 mA |
 | Binder Series 680, male socket, 6-pin Pin 1 & 2: -5V Pin 4 & 5: +5V Pin 3 & 6: GND |
| Dimensions: | 80 x 150 x 50 mm |
| Weight: | 310 g |
| Operating Temperature: | 0...+ 60 °C |
| Connectors: | 2 x BNC (Input / Output), 1x DC-Plug (Power Supply) |